Training / Certifications / CompTIA Network+ / Network Topologies and Architectures

CompTIA Network+ (N10-009) · Lesson 11

Network Topologies and Architectures

Compare point-to-point, star (hub and spoke), mesh and hybrid topologies; the three-tier, collapsed core and spine and leaf architectures; and north-south versus east-west traffic flows.

Domain 1.0: Networking Concepts (23%)Objective 1.6About 5:34CaptionsStatic view for reduced motion
Lesson 11: Topologies and architectures Illustrative example: sites and device counts are samples Point to point (example)OfficeWarehouseone dedicated linkJust two endpoints on the link:no other device shares itStar (LAN) and hub and spoke (WAN)SwitchLANBranchBranchBranchBranchHQ hubWANFull mesh: every device to every otherR1R2R3R4R55 routers × 4 ÷ 2 = 10 linksHybrid: two topologies combinedStore siteOfficeWarehousemesh between sitesstarstarstarThree-tier hierarchical modelCoreCoreDistributionDistributionDistributionDistributionAccessAccessAccessAccessAccessAccessCollapsed core (two-tier)Core + distributionCore + distributionAccessAccessAccessAccessTwo tiers: the core layer is mergedFewer switches: fits a single building or small siteSpine and leafSpineSpineSpineLeafLeafLeafLeafLeafServers connect to leaves onlyInternetnorth-southeast-westPoint to pointExactly two endpoints, one linkExamples: leased line, sitelink, wireless bridgeSimple and privateNo redundancy: one link, one pathExam clueTwo sites joined byone dedicated linkStar / hub and spokeEvery device links to a centerLAN: PCs to one switchWAN: branches to an HQ hubEasy to add devices and manageCenter fails: everyone is cut offSpoke to spoke goes via the hubExam clueCentral device, singlepoint of failureMeshFull: every device to every otherLinks = n × (n − 1) ÷ 2Most redundancy, most costPartial: only some extra linksCommon between routers and sitesExam clueMost redundant, manypaths between sitesHybridTwo or more topologies mixedExample: star LAN at each site,mesh WAN between the sitesMost real networks are hybridExam clueA mix of star and mesh,or any combinationThree-tier modelCore: fast backbone that joinsthe distribution switchesDistribution: aggregates access,routing and policy (L2/L3 edge)Access: where users and devicesplug in (ports, PoE, VLANs)Built for large campusesExam clueCore, distribution,accessCollapsed coreCore and distribution mergedTwo tiers: core/distributionplus accessLower cost, simpler designSuits smaller sites and buildingsExam clueTwo-tier design for asmall or medium networkSpine and leafEvery leaf links to every spineNo leaf-to-leaf or spine-to-spineAny two servers on differentleaves: leaf, spine, leafSame hop count, all paths usedMore ports: add a leafMore bandwidth: add a spineExam clueData center, predictablelow latency, scales outTraffic flowsNorth-south: in and out of thedata center (users, internet)East-west: server to serverinside the data centerModern apps: east-west is heavySpine and leaf suits east-westExam clueServer to serverinside = east-westTopologiesThe shape of the links:point to point, star,mesh, hybridArchitecturesHow switches are layered:three-tier, collapsedcore, spine and leafTraffic flowsWhich way traffic moves:north-south oreast-westObjective 1.6: compare and contrast network topologies, architectures and typesExample throughout: an online store's office, warehouse and data centerIf the question says……think“Every device has a link to every other”Full mesh“All devices connect to one central switch”Star“Branches connect only through headquarters”Hub and spoke“Core, distribution and access layers”Three-tier hierarchical“Small site merges core and distribution”Collapsed core“Every leaf to every spine, data center”Spine and leaf“Server-to-server traffic inside the DC”East-westTopologiesPoint to point: two endsStar: one centerMesh: many pathsHybrid: a mixArchitecturesThree-tier: core, distribution, accessCollapsed core: two tiersSpine and leaf: DCTraffic flowsNorth-south: in and outEast-west: server to server insideReal networks mix them: star LANs, a meshed WAN, spine and leaf in the data center.

Tip: turn your phone sideways or use full screen for larger labels.

Captions match the narration word for word. Press Space to play or pause and the arrow keys to change scenes.

Learning objective

Compare point-to-point, star (hub and spoke), mesh and hybrid topologies; the three-tier, collapsed core and spine and leaf architectures; and north-south versus east-west traffic flows.

Exam mapping

Domain 1.0: Networking Concepts (23%). Objective 1.6 in the official N10-009 exam objectives.

Key takeaways

  • Point to point joins exactly two endpoints over one link: simple and private, but with no redundancy.
  • A star connects every device to a central switch; hub and spoke is the WAN version, with branches connecting through a headquarters hub. The center is a single point of failure.
  • A full mesh links every device to every other: n(n−1)/2 links, the most redundancy and the most cost. A partial mesh adds only some extra links.
  • A hybrid topology combines two or more topologies, such as star LANs joined by a meshed WAN.
  • The three-tier model has access (where devices plug in), distribution (aggregation, routing and policy) and core (fast backbone). A collapsed core merges core and distribution into two tiers for smaller sites.
  • In spine and leaf, every leaf connects to every spine, giving equal leaf-spine-leaf paths. It suits data centers with heavy east-west (server-to-server) traffic; north-south traffic enters or leaves.

Exam tips

How the exam asks about this

Questions describe a situation and expect you to recognize the concept behind it.

If the question mentions…Think
Every device has a direct link to every otherFull mesh
All devices connect to one central deviceStar
Branch offices connect only through headquartersHub and spoke
A star and a mesh used togetherHybrid
Core, distribution and access layersThree-tier hierarchical model
Core and distribution combined in a small networkCollapsed core
Every leaf switch connects to every spine switchSpine and leaf
Server-to-server traffic inside the data centerEast-west

Common traps

  • In spine and leaf, leaves never connect to each other and spines never connect to each other: every leaf connects to every spine.
  • Collapsed core merges the core and distribution layers, not distribution and access.
  • Traffic between users on the internet and servers in the data center is north-south, even though it reaches the servers; only server-to-server traffic is east-west.
  • A full mesh of n devices needs n(n−1)/2 links, not n². Five devices need 10 links.

Practice

Exam-style questions

Answer each one before you open the explanation.

Question 1. A company connects six branch offices so that each branch has a direct link to every other branch. How many links does this full mesh need?

  1. 6
  2. 12
  3. 15
  4. 30
  5. 36
Show answer

C. 15. A full mesh needs n(n−1)/2 links: 6 × 5 ÷ 2 = 15. 30 is n(n−1) without dividing by two (each link would be counted twice), and 36 is n².

Question 2. Which TWO statements describe a spine and leaf architecture? (Select TWO.)

  1. Every leaf switch connects to every spine switch
  2. Leaf switches connect directly to each other for redundancy
  3. Servers connect to the spine switches
  4. Traffic between servers on different leaves crosses exactly one spine
  5. Spine switches are linked together in a ring
Show answer

A. Every leaf switch connects to every spine switch and D. Traffic between servers on different leaves crosses exactly one spine. Every leaf links to every spine, so a server on one leaf reaches any other leaf through one spine. Servers attach to leaves, not spines, and there are no leaf-to-leaf or spine-to-spine links.

Question 3. A small company has one office building. Its network engineer wants to reduce cost by combining the core and distribution functions into a single pair of switches. Which design is this?

  1. Spine and leaf
  2. Three-tier hierarchical
  3. Collapsed core
  4. Point to point
Show answer

C. Collapsed core. A collapsed core merges the core and distribution layers, leaving a two-tier design. The three-tier model keeps them separate, which suits large campuses rather than one building.

Question 4. In a data center, a web server queries a database server in the next rack. How is this traffic described?

  1. North-south
  2. East-west
  3. Hub and spoke
  4. Point to point
Show answer

B. East-west. Server-to-server traffic that stays inside the data center is east-west. North-south traffic enters or leaves the data center, such as a customer request from the internet.

Question 5. Each of a retailer's 40 stores has a single WAN link to the headquarters data center, and store-to-store traffic passes through headquarters. Which topology is this, and what is its main weakness?

  1. Full mesh; it needs too many links
  2. Hub and spoke; the hub is a single point of failure
  3. Point to point; it supports only two stores
  4. Spine and leaf; it adds latency between stores
Show answer

B. Hub and spoke; the hub is a single point of failure. All sites connecting through one central site is hub and spoke (a WAN star). If the hub fails, the stores lose connectivity to it and to each other. A full mesh would give every store a direct link to every other.

Transcript

Lesson transcript

The full narration, scene by scene. The captions file contains the same text with timings.

Scene 1 · 0:00

Lesson 11: Topologies and architectures. Welcome to lesson eleven. Objective 1.6 asks you to compare and contrast network topologies, architectures and types. We'll cover three things. Topologies are the shape of the links: point to point, star, mesh and hybrid. Architectures are how switches are layered: the three-tier model, the collapsed core, and spine and leaf. And traffic flows describe which way traffic moves: north-south or east-west.

Scene 2 · 0:27

Point to point: two ends, one link. Let's follow an online store. Its office and its warehouse are joined by a single dedicated link. That's a point-to-point topology: exactly two endpoints, and nothing else shares the connection. Leased lines, a direct link between two sites, and a wireless bridge between two buildings are all examples. Point to point is simple and private, but with one link there's only one path, so there's no redundancy.

Scene 3 · 0:56

Star and hub and spoke. Inside the office, every computer plugs into one switch. That's a star topology: every device links to a central point. It's easy to add devices and easy to manage, but the center is a single point of failure. The wide area version is called hub and spoke: each branch connects only to the headquarters hub. Branch-to-branch traffic travels through the hub, which keeps routing simple but loads the hub.

Scene 4 · 1:26

Mesh: many paths. In a full mesh, every device has a direct link to every other device. If one link fails, traffic simply takes another path, so mesh gives the most redundancy. The cost is the number of links: n times n minus one, divided by two. Five routers need ten links, and ten routers would need forty-five. That's why many networks use a partial mesh, adding extra links only between the most important sites.

Scene 5 · 1:58

Hybrid: mixing topologies. Real networks rarely use just one shape. As the store grows, each site has its own star of computers around a switch, and the three sites are meshed together for redundancy. Combining two or more topologies like this is called a hybrid topology. On the exam, if a design mixes star and mesh, or any other combination, the answer is hybrid. Most real networks you'll work on are hybrids.

Scene 6 · 2:28

The three-tier hierarchical model. Now architectures. A large campus often uses the three-tier hierarchical model. The access layer is where users and devices plug in, with features such as VLANs and power over Ethernet. The distribution layer aggregates the access switches and applies routing and policy, forming the boundary between Layer 2 and Layer 3. The core layer is a fast, highly available backbone that connects the distribution switches together.

Scene 7 · 2:57

Collapsed core: two tiers. A smaller site doesn't need a separate core. In a collapsed core design, the core and distribution layers are merged into one pair of switches, and the access layer connects to them. That's a two-tier design: fewer switches, lower cost, and a simpler network, which suits a single building or a small campus. When a site grows to several buildings with their own distribution switches, adding a dedicated core makes sense.

Scene 8 · 3:28

Spine and leaf in the data center. Data centers often use spine and leaf. Servers connect to leaf switches, and every leaf connects to every spine. Leaves don't connect to each other, and spines don't connect to each other. So a server on one leaf reaches a server on any other leaf through exactly one spine: leaf, spine, leaf. Every path is the same length and all of them can carry traffic. Need more ports? Add a leaf. More bandwidth? Add a spine.

Scene 9 · 4:01

North-south vs. east-west traffic. Engineers also describe which way traffic flows. North-south traffic enters or leaves the data center, such as a customer on the internet loading the store's website. East-west traffic stays inside, moving from server to server, like the web server asking the database for an order. Modern applications create a lot of east-west traffic, and spine and leaf handles it well because every server is the same distance from every other.

Scene 10 · 4:31

How the exam asks about this. On the exam, match the clue to the answer. Every device linked to every other is a full mesh. Everything connected to one central switch is a star, and branches that connect only through headquarters is hub and spoke. Core, distribution and access is the three-tier model, and merging core and distribution is a collapsed core. Every leaf connected to every spine is spine and leaf, and server-to-server traffic inside the data center is east-west.

Scene 11 · 5:04

Recap: topologies and architectures. To recap: point to point joins exactly two endpoints. A star connects everything to a center, and hub and spoke does the same across a WAN. A mesh gives many paths, and a hybrid mixes topologies. The three-tier model has core, distribution and access layers, and a collapsed core merges the top two. Spine and leaf serves data centers, where east-west traffic is heavy. Next, we'll start IPv4 addressing.

Download captions (WebVTT)

Sources and accuracy

Checked against the official CompTIA N10-009 exam objectives and the standards below on October 24, 2026. Diagrams and addresses in the animation are illustrative.

This free course is independent and isn't affiliated with or endorsed by CompTIA. CompTIA and Network+ are trademarks of CompTIA, Inc.

← Lesson 10Transceivers and Connectors
Lesson 12Arrives

Preparing a team for Network+?

I run hands-on networking and cloud training for teams, built around your own environment and goals.